News

Alientech has released protocols for Siemens SIMK42 5WY1xxxx, Continental, SIM2K-140, Bosch ME7.9.41, Bosch M79 and Hitachi 22611 AN470 ECUs. This means that you can now work on these ECUs in Boot mode using KESS3. Here is the full vehicle list: Siemens SIMK42 5WY1xxxx KIA Rio 1.3i 8v 5MT Petrol 55

Alientech is going to release a new feature to Alientech Suite and KESS3 in July 2024 called DynoDrive that will allow for calculating and verifying performance while driving a vehicle. Here is what Alientech has to say about the new feature: LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD! Feature

The latest protocol from Alientech makes it possible to work through OBD on Bosch DCU17PC43 ECUs using KESS3. The ECU is installed in a wide range of last gen Ford engines. See the full vehicle list here: Bosch DCU17PC43 FORD Ecosport 1.5 EcoBlue Diesel 92 kW Ecosport 1.5 EcoBlue Diesel

Alientech has released protocols for seven Mitsubishi ECUs. This means that you can now use KESS3 to work in Bench mode on Mitsubishi ECUs: 32920-23KD0, 32920-27G00, 32920-06G41, 21175-0099, B4F-8591A-10, 32920-06G01, and 21175-0254. See the full vehicle list here: Mitsubishi 32920-23KD0 SUZUKI GSX-S 150 Petrol 14 kW GSX-R 150 Petrol 14

Alientech has released two new developments for KESS3. The new protocols allow you to work in Boot mode on Siemens SIM4LKE and EMS2214 ECUs. See the full vehicle list here: Siemens SIM4LKE MERCEDES-BENZ C-Class 180 Kompressor 5AT Petrol 105 kW C-Class 180 Kompressor 5AT Petrol 107 kW C-Class 180 Kompressor

With the New Trasdata update from Dimsport, you can now work in Bench mode on BOSCH MG1UA008 and BOSCH MG1US008 ECUs. See the full vehicle list here: BAIC X35 1.5L TURBO CHANA/CHANGAN AUTO CS35 PLUS 1.4L TURBO CMC CIRELLI 3 1.5L TURBO CMC CIRELLI 4 1.5L TURBO CMC CIRELLI 7 1.5L TURBO DFSK

OBD ( All via the OBD2 diagnostic plug ) AMG / MERCEDES-BENZ DELPHI CPC2.10 TC1797: Read + Write ( All[Backup] / Int. Flash / Int. Eeprom ) / Restore ORI / Recovery / Checksum(s) / DTC Clear / Clone AMG / MERCEDES-BENZ DELPHI CPC2.15 TC1793: Read + Write ( All[Backup]

Alientech has released a new protocol for Denso 276700-2051 ECUs. This means that you can now work in Bench mood on the latest generation of Isuzu N-Series trucks using KESS3. See the full vehicle list here: Denso 276700-2051 ISUZU N-Series NPR-HD 5.2 TD 6AT Diesel 160 kW N-Series NPR-XD 5.2

The newest protocol from Alientech allows you to use Alientech KESS3 in Boot mode so that you can work on the Delphi DCM7.24 ECU. See the full vehicle list here: Delphi DCM7.24: JCB Backhoe Loader 140X LC 4.8L Diesel 81 kW Backhoe Loader 150X LC 4.8L Diesel 81 kW Backhoe

CPU INFINEON AURIX SAK-TC2xxTP/FREESCALE SPC5777M NEW: 105 – INFINEON AURIX TC2XX/FREESCALE SPC57XX BOSCH CHINA MDG1 MSE8 E-GPT ALLBRAND BOSCH MG1UA008 SPC574K72 BAIC/CMC/SWM/DFSK petrol NEW – BENCH MODE – plugin 1968 All SWM / BAIC / CMC / DFSK vehicles with MG1UA008 ECU already supported by FLASH_0897 BOSCH MSE8.0 CFMoto SPC572L64

Alientech has released two new protocols for KESS3. This means that you can now work on the Denso 112731-5040 and Denso 33910-79JX/57KX ECUs in Benche mode. See the full vehicle list here: Denso 112731-5040 SUBARU Forester 2.5i CVT Petrol 127 kW Legacy 2.5i CVT Petrol 127 kW Outback 2.5i CVT

Dimsport has released a new update for Trasdata, allowing you to work on the Marelli MBC1 and MBC2 ECUs in Bench mode. See the full list of bikes here: BMW MOTORRAD C 600 Sport (2011-2015)  C 650 (2016-2020)  G 310 GS (2017-2020) G 310 R (2016-2020)   HUSQVARNA Nuda 900 (2011-2013)  TR 650 (2012-2013)