News

Alientech just dropped a bunch of new protocols for Alientech KESS3., a total of eight new protocols. These protocols are dedicated to the VAG group and the ECU list is long. The ECU that you will now be able to work in BENCH mode on is Bosch EDC15VM+, Continental SDI9,

Alientech has released a new and improved version of ECM Titanium recalibration software. There are 5 new features:   Automatic Table Alignment Say goodbye to manual resizing, even in table view! Now you can select and align tables with a simple click, simplifying the comparison and transfer of changes between

Dimsport has released a new update for New Transdata. Here is the list of releases: INFINEON TRICORE CPU ADD: 003 – INFINEON TRICORE NO PSW CANLINE FoMoCo EMS2301/EMS2302 TC1724 FORD petrol NEW – OPEN MODE – plugin 1955 FORD KA Mk3 1.5L L4 82kW EMS2301/EMS2302 FORD KA Mk3 1.5L L3

The new protocol Flash_0905 from Dimsport makes it possible to work on trucks that are equipped with Continental-Temic ECU with microprocessor XC2288 equipped with software variants 30 and 31 using New Genius. These ECU are for example installed on Mercedes Actros MY22/23 Euro 5.

Upgrade 1.79 let you work in BOOT mode on Hyundai and KIA vehicles with Continental SIM2K-242, Continental SIM2K-253 ECUs, Continental SIM2K-259 ECU/TCUs aswell as Continental SIM2K-242 and Bosch MEDG17.9.8 TCUs. See the vehicle list here: ECU – Continental SIM2K-242​: HYUNDAI: Sonata 2.0 16v Petrol 121 kW KIA: Optima 2.0 16v

Two new protocols from Alientech mean that you can now work OBD on Bosch MG1UA008 and MG1US008 ECUs. Vehicle list: Bosch MG1UA008: DFSK MOTOR: Fengon 500 1.5 CVT Petrol 85 kW BAIC: Senova X35 1.5T 16V l4 Petrol 110 kW PROTON: X-50 1.5T 12v Petrol 110 kW Bosch MG1US008: DFSK

It is now possible to access the Bosch MG1CS036 ECU using Bench mode with Alientech KESS3. The Bosch MG1CS036 is installed in recent Ford models with EcoBoost and Ti-VCT engines, see the full vehicle list here: FORD: Ranger 2.3 EcoBoost Petrol 201 kW F-150 5.0 Ti-VCT V8 Petrol 300 kW

New protocol for New Genius from Dimsport. Vehicle list: Car: FLASH_0904 RENAULT HITACHI BED506 CAN R/W RENAULT MEGANE 4 (XFB) 1.8L RS Trophy TCe 221kW Bike: FLASH_0906 HONDA KEIHIN 38770-MKC KLINE R/W HONDA MOTORCYCLES GL 1800 MY18->23 93kW Truck: FLASH_0905 MERCEDES TRUCK / CLAAS TRACTOR CONTINENTAL/TEMIC XC2288 KLINE R/W Protocol

New protocol for Bosch MD1CS016. Work in bench mode with KESS3 on the ECU that controls Dacia, Nissan and Renault models with 1.5 or 2.0 dCi engines. Vehicle list: DACIA: Lodgy 1.5 Blue dCi 115 Diesel 85 kW Duster 1.5 Blue dCi 115 Diesel 85 kW NISSAN: Qashqai 1.5 dCi

Dimsport has released a new protocol FLASH-0903. With this protocol, you can work OBD on KEIHIN ECUs installed on KTM, Husqvarna and GASGAS off-road two-wheelers using New Genuis. Here is the full list of bikes: KTM: SX-F 250 16->23 35kW SX-F 350 16->23 42kW SX-F 450 16->23 46kW XC/EXC-F 250 17->23 31kW XC/EXC-F 350 17->23

You can now read and write via OBD on the latest John Deere tractors with Phoenix L40 ECU’s. This includes the 7 series, 8 series and 9 series models from John Deere. See the full list here: Phoenix L40 JOHN DEERE: Tractor 7 Series 7R 290 9.0L I6 Diesel 235

New protocols for three different Mitsubishi ECUs.You can now work in bench mode on Mitsubishi 21175-1591/1369, Mitsubishi 21175-0131 and Mitsubishi 32910-11L00. The Mitsubishi 21175-1591/1369 ECU are installed in the latest small Kawasaki Z-125 and Ninja 125. It also means that you can work on the Mitsubishi 21175-013 ECU in Kawasaki