File Service News

Dimsport has released a new update for New Transdata. Here is the list of releases: INFINEON TRICORE CPU ADD: 003 – INFINEON TRICORE NO PSW CANLINE FoMoCo EMS2301/EMS2302 TC1724 FORD petrol NEW – OPEN MODE – plugin 1955 FORD KA Mk3 1.5L L4 82kW EMS2301/EMS2302 FORD KA Mk3 1.5L L3

The new protocol Flash_0905 from Dimsport makes it possible to work on trucks that are equipped with Continental-Temic ECU with microprocessor XC2288 equipped with software variants 30 and 31 using New Genius. These ECU are for example installed on Mercedes Actros MY22/23 Euro 5.

Upgrade 1.79 let you work in BOOT mode on Hyundai and KIA vehicles with Continental SIM2K-242, Continental SIM2K-253 ECUs, Continental SIM2K-259 ECU/TCUs aswell as Continental SIM2K-242 and Bosch MEDG17.9.8 TCUs. See the vehicle list here: ECU – Continental SIM2K-242​: HYUNDAI: Sonata 2.0 16v Petrol 121 kW KIA: Optima 2.0 16v

Two new protocols from Alientech mean that you can now work OBD on Bosch MG1UA008 and MG1US008 ECUs. Vehicle list: Bosch MG1UA008: DFSK MOTOR: Fengon 500 1.5 CVT Petrol 85 kW BAIC: Senova X35 1.5T 16V l4 Petrol 110 kW PROTON: X-50 1.5T 12v Petrol 110 kW Bosch MG1US008: DFSK

It is now possible to access the Bosch MG1CS036 ECU using Bench mode with Alientech KESS3. The Bosch MG1CS036 is installed in recent Ford models with EcoBoost and Ti-VCT engines, see the full vehicle list here: FORD: Ranger 2.3 EcoBoost Petrol 201 kW F-150 5.0 Ti-VCT V8 Petrol 300 kW

New protocol for New Genius from Dimsport. Vehicle list: Car: FLASH_0904 RENAULT HITACHI BED506 CAN R/W RENAULT MEGANE 4 (XFB) 1.8L RS Trophy TCe 221kW Bike: FLASH_0906 HONDA KEIHIN 38770-MKC KLINE R/W HONDA MOTORCYCLES GL 1800 MY18->23 93kW Truck: FLASH_0905 MERCEDES TRUCK / CLAAS TRACTOR CONTINENTAL/TEMIC XC2288 KLINE R/W Protocol

New protocol for Bosch MD1CS016. Work in bench mode with KESS3 on the ECU that controls Dacia, Nissan and Renault models with 1.5 or 2.0 dCi engines. Vehicle list: DACIA: Lodgy 1.5 Blue dCi 115 Diesel 85 kW Duster 1.5 Blue dCi 115 Diesel 85 kW NISSAN: Qashqai 1.5 dCi

Dimsport has released a new protocol FLASH-0903. With this protocol, you can work OBD on KEIHIN ECUs installed on KTM, Husqvarna and GASGAS off-road two-wheelers using New Genuis. Here is the full list of bikes: KTM: SX-F 250 16->23 35kW SX-F 350 16->23 42kW SX-F 450 16->23 46kW XC/EXC-F 250 17->23 31kW XC/EXC-F 350 17->23

You can now read and write via OBD on the latest John Deere tractors with Phoenix L40 ECU’s. This includes the 7 series, 8 series and 9 series models from John Deere. See the full list here: Phoenix L40 JOHN DEERE: Tractor 7 Series 7R 290 9.0L I6 Diesel 235

New protocols for three different Mitsubishi ECUs.You can now work in bench mode on Mitsubishi 21175-1591/1369, Mitsubishi 21175-0131 and Mitsubishi 32910-11L00. The Mitsubishi 21175-1591/1369 ECU are installed in the latest small Kawasaki Z-125 and Ninja 125. It also means that you can work on the Mitsubishi 21175-013 ECU in Kawasaki

New protocols from Dimsport for New Genius. Here is a list of the bikes and cars that have been updated with the newest protocol. Bike:  FLASH_0773 HONDA <E5 KEIHIN KLINE R/W: ATTENTION! From now protocol FLASH_0773 can in addition manage 38770-MCA and 38770-MJG ECUs present on HONDA GOLDWING GL1800 MY06-16.

New tractor protocol from Alientech. you can now work OBD on the Delphi DCM7.24 ECU installed in JCB work vehicles. Vehicle list: JCB Backhoe Loader 140X LC 4.8L Diesel 81 kW Backhoe Loader 150X LC 4.8L Diesel 81 kW Backhoe Loader 3CX ECO 3.0L Diesel 55 kW Telehandler 536-95 Agri