Tuning the Sany SY135C

2017 Sany SY135C

Excavator – 3.0L – Transtron ECU

The Challenge

This article explores the potential of tuning the Sany SY135C excavator, transforming it from a modest construction machine into a versatile powerhouse. ECU tuning empowers us to fine-tune a broad spectrum of settings, allowing for the customization and optimization of the machine’s performance.

The Sany SY135C belongs to the family of compact fixed boom excavators and is equipped with an Isuzu 4JJ1-FT4 engine managed by its Transtron ECU. In a world where large machines dominate, the need to access confined spaces persists. Not everyone can afford a big machine, but that shouldn’t limit the potential for significant power. Alt Tune’s ECU tuning service enhances the power and reliability of these machines.

The Solution

Through our ECU tuning services, the 4JJ1-FT4 engine can surpass factory standards without the need for additional parts. We make adjustments to the settings in the Sany SY135C’s Transtron ECU using VF2. This ensures that the excavator performs according to your specific requirements. Alt Tune’s custom tuning enhances power and torque output, facilitating a more efficient and expedited workflow.

To bolster the reliability of the Sany SY135C excavator, we’ve developed an emissions solution to address issues with the emission system. Factory emission system settings often lead to problems that compromise the machine’s reliability. These issues can be costly to resolve and may not offer a permanent solution. By integrating our solution into the ECU, your Sany SY135C excavator becomes more efficient and dependable.

Increased Power

%

Power Increase

%

Torque Increase

Further Benefits Of Tuning The Sany SY135C

Increased Power and Torque

With more power and torque, a tuned machine can handle heavier loads and perform tasks more efficiently. It allows the machine to pull or push larger implements, haul heavier loads, and complete tasks faster, resulting in increased productivity.

Years of Development

We have been tuning the Isuzu 4JJ1-FT4 3.0L engine for years, and understand how they work as well as the limitation on factory hardware.

}

Easy and fast programming

Easy, fast and non-evasive via programming the factory-fitted diagnostic port.

So, if you’re looking to take your Sany excavator to the next level, don’t hesitate to reach out to us! Our dedicated team is ready to unleash the full potential of your vehicle and make your driving dreams a reality!

 

Tuning Enquiry

"*" indicates required fields

City and Country*
This field is for validation purposes and should be left unchanged.

Related Case Studies

Tuning the John Deere 310SL

Tuning The John Deere 310SL: Beneficial Investment

2018 John Deere 310SL Backhoe Loader - 4.5L Phoenix L33 ECU Alietech KESS3The Challenge In this article, we explore the transformative impact of tuning the John Deere 310SL backhoe loader, uncovering how it can unlock new operational possibilities. Specifically, ECU...
2017 SANY SY135C

Tuning The Sany SY135C Excavator: Dependable and Efficient

2017 Sany SY135C Excavator - 3.0L - Transtron ECUThe Challenge This article explores the potential of tuning the Sany SY135C excavator, transforming it from a modest construction machine into a versatile powerhouse. ECU tuning empowers us to fine-tune a broad spectrum...
Tuning the Caterpillar 326F L. Alt Tune tuned a Caterpillar excavator to increase power and torque

Tuning The Caterpillar 326F L: No More Emissions Systems Problems

2017 Caterpillar 326FL Hydraulic Excavator - C7.1 ACERT - A5E2 ECUThe Challenge This blog post aims to shed light upon the benefits of tuning the Caterpillar 326F L excavator. This strategic investment not only will improve performance but also prove to be a...
Case TR340B loader, same model was tuned by Alt Tune

Tuning The Case TR340B Loader: Optimize Emissions Solution

2022 Case TR340B Loader - 3.4L - EDC17C49 ECUThe Challenge We will in this article go into what issues tuning the Case TR340B can help with and how it will optimize your operation. The TR340B has a special weak point when it comes to its emissions solution. This can...
Tuning The Caterpillar 538

Tuning The Caterpillar 538: Becoming a reliable workhorse

Caterpillar 538 Caterpillar ADEM ECUThe Challenge The Caterpillar 538 is a powerhouse among forest excavators, renowned for its robust construction and exceptional capabilities. As a workhorse in the forest industries, the 538 already demonstrates impressive...
Tuning The Kobelco SK170

Tuning The Kobelco SK170 Excavator

2022 Kobelco SK170 Excavator - 5.1L - Transtron ECUThe Challenge The 2022 Kobelco SK170 is a robust and efficient excavator that stands out for its versatility and performance on construction sites. As one of Kobelco's top-tier models, the SK170 already delivers...
Tuning The Vermeer T1055 Trencher

Tuning The Vermeer T1055 Trencher: Make every project a breeze

2019 Vermeer T1055 Trencher 415 HP C13 - Caterpillar ADEM ECUThe Challenge The Vermeer T1055 trencher is a powerful and efficient machine designed to handle the most demanding excavation and trenching projects. Renowned for its reliability and productivity, the T1055...
John Deere wheel loader. Example of a wheel loader that Alt Tune have tuned

2022 John Deere Wheel Loader 544K Tuned!

2022 John Deere Wheel Loader 544K Now With Extra Power! The John Deere Wheel Loader 544K is a heavy-duty construction machine designed for loading and moving materials such as dirt, gravel, rocks, and other heavy items. John Deere emphasizes ease of maintenance and...
Drawing of a wheel loader.

2011 New Holland W190C Tuned!

2011 New Holland W190C Tuned! The 2011 New Holland W190C is a heavy-duty wheel loader that was designed to handle demanding applications in the construction and mining industries. The operator's cab of the W190C is designed with comfort and productivity in mind. Its...
challenger rogator rg1300. Alt Tune Adblue DEF

Challanger Rogator RG1300 Adblue / DEF solution

The Challanger Rogator RG1300 is power by a  AGCO Power engine with a displacement of 8.4-litres. The engine is controlled by a Bosch EDC17CV44. The ECU/ECM can be reprogrammed via the diagnostic port to solve any DEF / Adblue issues.   Get in touch if you have a...